The EM-Tec swivel sample holders enable full tilting both ways in any direction. This is ideal for viewing samples at multiple angles, even offering tilt directions normally not available on your SEM. The EM-Tec swivel tilt sample holders are ideal for adding tilt facilities on table top SEMs. The EM-Tec swivel sample holders include a hinge which can be locked with a screw at any angle through a +/- 90 degrees range. The base (pin or cylinder stub) can be rotated when mounted and offers tilt directions in a full half sphere. The EM-Tec swivel sample holders are now available for all SEMs:
- pin stub base for FEI/Philips, Phenom, Tescan, Zeiss/LEO, Amray, Pemtron, Coxem and others
- M4 threaded base for Hitachi SEMs and th eHitachi TM series table top SEMs
- Ø12.2x10mm JEOL stub base for JEOL SEMs and the JEOL Neoscope table top SEM
The range of EM-Tec swivel sample holders
- EM-Tec PS17 mini swivel vise mount to hold sample or cross sections up to 4mm thick. The sample is held by a set screw. Dimensions above pin are Ø12x18mm. Also available as EM-Tec HS17 for Hitachi SEM and JS17 for JEOL SEMS.
- EM-Tec PS18 mini split mount swivel vise to hold samples from 0-8mm between mini vise jaws. Closed, the dimensions are Ø15x24mm above pin; when opened dimensions are 23x15x24mm above pin. Also available as HS18 for Hitachi SEM and JS18 for JEOL SEMs.
- EM-Tec GS10 swivel vise for larger samples and cross sections from 0-10mm; even allows mounting two cross sections at the time. This is the ultimate holder for imaging cross sections at any desired angle. The swivel head size without clamping screws is only 16x16x14mm. The sample is clamped with the two clamping screws; the swivel head can be locked in place with the tilt clamping screw. Made from gold plated brass. Also available as HG10 for Hitachi SEM and JG10 for JEOL SEMs.
- EM-Tec PS19 wide swivel clamp to hold samples up to 16mm. The sample is held by a set screw. Dimensions are Ø25x24mm above pin. Also available as PS19 for Hitachi SEM and JS19 for JEOL SEMs.
- EM-Tec PS15 swivel pin stub mount. Excellent mount for SEMs without tilting facilities or when random tilt angled are needed. Top diameter is 15mm and height above pin is 15mm. Also available as HS15 for Hitachi SEM and JS15 for JEOL SEMs.
- EM-Tec PS15C S-Clip swivel pin stub mount with an S-Clip to clamp thin samples up to 2mm thickness. Allows full 90 degrees tilt each way. Dimensions are Ø15x17mm above pin. Also available as HS15C for Hitachi SEM and JS15C for JEOL SEMs.
- EM-Tec PSM4 swivel mount adapter with M4. This swivel adapter converts small sample holders into swivel holders or mounting Hitachi stubs to convert into swivel stubs. The EM-Tec PSM4 swivel mount adapter is intended for smaller holders and stubs since larger holders do limit the tilt range. Dimensions are Ø9×14 above pin. Also available as HSM4 for Hitachi SEMs and as LSM4 for JEOL SEMS.
 | EM-Tec PS15C Pin stub swivel mount sample holder with 1xS-Clip, pin 4 |
|---|
| Product # | Unit |
| 12-002901 | each |
 | EM-Tec PS15 Pin stub swivel mount, Ø15x15mm, pin |
|---|
| Product # | Unit |
| 12-000211 | each |
 | EM-Tec GS10 swivel head sample holder for up to 10mm, gold plated brass, pin |
|---|
| Product # | Unit |
| 12-000110 | each |
 | EM-Tec PS17 mini swivel vise holder for up to 4mm, aluminium, pin |
|---|
| Product # | Unit |
| 12-003240 | each |
 | EM-Tec PS18 mini swivel split mount vise for up to 8mm, aluminium, pin |
|---|
| Product # | Unit |
| 12-003230 | each |
 | EM-Tec PS19 swivel clamp for up to 16mm samples, aluminium, pin |
|---|
| Product # | Unit |
| 12-003215 | each |
 | EM-Tec PSM4 swivel mount adapter with M4, aluminium, pin |
|---|
| Product # | Unit |
| 11-000215 | each |
 | EM-Tec HS15C S-Clip swivel mount sample holder with 1xS-Clip, Ø15mm, M4 |
|---|
| Product # | Unit |
| 12-004911 | each |
 | EM-Tec HS19 swivel clamp for up to 16mm samples, aluminium, M4 |
|---|
| Product # | Unit |
| 12-003315 | each |
 | EM-Tec HS18 mini swivel split mount vise for up to 8mm, aluminium, M4 |
|---|
| Product # | Unit |
| 12-003330 | each |
 | EM-Tec HS17 mini swivel vise holder for up to 4mm, aluminium, M4 |
|---|
| Product # | Unit |
| 12-003340 | each |
 | EM-Tec HGS10 swivel head sample holder for up to 10mm, gold plated brass, M4 |
|---|
| Product # | Unit |
| 12-003110 | each |
 | EM-Tec HSM4 swivel mount adapter with M4, aluminium, M4 |
|---|
| Product # | Unit |
| 11-000315 | each |
 | EM-Tec HS15 Hitachi stub swivel mount, Ø15x21mm, aluminium, M4 |
|---|
| Product # | Unit |
| 12-003211 | each |
 | EM-Tec JS15C S-Clip swivel mount sample holder with 1xS-Clip, JEOL Ø12.2mm |
|---|
| Product # | Unit |
| 12-005911 | each |
 | JS15 JEOL stub swivel mount, Ø12.2x25mm, +/- 90 degree, aluminium |
|---|
| Product # | Unit |
| 12-000511 | each |
 | EM-Tec JSM4 swivel mount adapter with M4, aluminium, JEOL Ø12.2mm |
|---|
| Product # | Unit |
| 11-000515 | each |
 | EM-Tec JS19 swivel clamp for up to 16mm samples, aluminium, JEOL Ø12.2mm |
|---|
| Product # | Unit |
| 12-005215 | each |
 | EM-Tec JS18 mini swivel split mount vise for up to 8mm, aluminium, JEOL Ø12.2mm |
|---|
| Product # | Unit |
| 12-000530 | each |
 | EM-Tec JS17 mini swivel vise holder for up to 4mm, aluminium, JEOL Ø12.2mm |
|---|
| Product # | Unit |
| 12-000540 | each |
 | EM-Tec JGS10 swivel head sample holder for up to 10mm, gold plated brass, JEOL Ø12.2mm |
|---|
| Product # | Unit |
| 12-005110 | each |
